AITO-interior panel

Bring a sense of smooth serenity to your walls with our AITO interior cladding. The white finish will add a sense of space while the grey creates a sense of calm. In AITO, we have allowed the grain of the wood to show through, while the narrow open joint allows for a smooth and natural finish. The cladding is quick and easy to install, making it the ideal way to create stylish finishes.

The AITO cladding is available in a 280 mm width. The panels are end matched and come with a concealed fixing system. The finished surfaces are completely smooth and nail free and the joint are easy to complete. Please note that the surfaces may feature an occasional resin pocket or knots. This is due to the drying process and depends on the level of humidity present. AITO interior plates can be used on the wall or in the ceiling. The panelling is not suitable for use in bathrooms and other wet spaces.

Fix the panels to the studwork through the tongue using a Dyckert nail or similar stiff nail or staples. Finishing nails are not suitable for fixing panels. It is advisable to use a compressed air nail gun for fixing the panels. The minimum nail length is three times the panel thickness. Adjust the nail penetration depth correctly. The nail may not protrude from the panel surface or sink too deep not to damage panel surface.

The following stables are recommended for installation

Dry areas, galvanized stable:
Senco L15BAB 1,2*6,4*32mm
Senco L17BAB 1,2*6,4*38mm

Stapler:
Senco SLS20L tai Senco SLS18MG