The VALO interior panel offers many possibilities for interior decoration. The deep grooved shape of the panels creates the impression of a lath ceiling. The tongue and groove installation method is easy and there is no need to consider the material beneath. VALO interior panel is designed so that LED strip lighting can be hidden between panels. This creates beautiful illumination between panels and allows for control around the volume of lighting as LED strips can be installed between as many or as few panels as desired. You can use the VALO panel on both the wall and the ceiling.
The VALO interior panels are finished with solid white and translucent white tones. The panel profiles have a hidden fastening systems which creates a clean wooden surface with no visible signs of nail heads. The surface of each VALO panel has been painted with water-borne finishing agents that are healthy and safe. These agents protect the wood from contamination, sunlight and moisture, but allow the wood to bind and release moisture into indoor air. VALO interior panels are suitable also as a roofing material for wet areas. However, make sure that there is mechanical ventilation in the room. The VALO panel is designed by Heli Mäkiranta.
The open joint between the panels accommodates a 17 mm wide aluminum profile. The aluminum profile protects the LED strip from dirt and dust.
Fix the panels to the studwork through the tongue using a Dyckert nail or similar stiff nail or staples. Finishing nails are not suitable for fixing panels. It is advisable to use a compressed air nail gun for fixing the panels. The minimum nail length is three times the panel thickness. Adjust the nail penetration depth correctly. The nail may not protrude from the panel surface or sink too deep not to damage panel surface.
Wet areas, stainless steel stable:
Senco L15BGA 1,2*6,4*32mm
Senco L17BGA 1,2*6,4*38mm
Dry areas, galvanized stable:
Senco L15BAB 1,2*6,4*32mm
Senco L17BAB 1,2*6,4*38mm
Stapler:
Senco SLS20L tai Senco SLS18MG
| Thickness | 28 mm |
|---|---|
| Width | 95 mm |
| Length | 4200 mm (white), to be checked (pearly birch) |
| Designer | Heli Mäkiranta |
| Color | White, pearly birch |
| Quality | Knotless RW F/J (white), birch (pearly birch) |
| Open joint | 18 mm |
| Attachment | Secret nailing |
| Wet spaces | Splash shielded (pearly birch) |
| Usage | 12,05 m/m² |
| Wastage | 10–15 % |
| Coverage | 1,04 m²/PKG |
| Sales unit | 3 pcs/PKG |
| Product code | Color | Thickness | Width | Length | Open joint | Coverage | Usage |
| VALOP28X95FPF1420 | White | 28 mm | 95 mm | 4200 mm | 18 mm | 83 mm | 12,05 m/m² |
| VALOP28X95BIQHO | Pearly birch | 28 mm | 95 mm | To be checked | 18 mm | 83 mm | 12,05 m/m² |
010 4242 000 (ark 09-16)
Anna palautetta ja auta meitä kehittämään tuotteitamme ja palveluamme.
Something on your mind? Feel free to contact us!
PEFC-Certificate 5193-09
